Nghĩa của từ turnbuckle|turnbuckles bằng Tiếng Anh

noun

coupling used to tighten rods or cables by a screwing mechanism (with two screws or with a screw and a swivel)

Đặt câu với từ "turnbuckle|turnbuckles"

Dưới đây là những mẫu câu có chứa từ "turnbuckle|turnbuckles", trong bộ từ điển Từ điển Tiếng Anh. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ turnbuckle|turnbuckles, hoặc tham khảo ngữ cảnh sử dụng từ turnbuckle|turnbuckles trong bộ từ điển Từ điển Tiếng Anh

1. Cable pulleys, deflection pulleys, turnbuckles, Masts, Anchoring, Tension hooks

2. Sherman Johnson Handy Lock Backstay turnbuckles feature dual handles for quick adjustment.

3. South by southwest, Mr Turnbuckle, heading 2-1-0-0.

4. The original Bobstay was typically fitted to the boat without a turnbuckle

5. Later boats had a Bobstay fabricated with a turnbuckle included, like ours.

6. Tension overall lashings using turnbuckles and staple nail lightly to the bearer boards.

7. 26 While for the equipment structure, they were the sectional area of nozzle, the pitch between screw and its turnbuckle, clearance, rotate speed, and the depth of the whorl on the turnbuckle.

8. The thread of the axle is fastened in the internal screw thread of the turnbuckle.

9. In the most preferred form, the valve actuator (232) is adjustably mounted to the piston (22) by a turnbuckle (238), with the valve actuator (232) and the turnbuckle (238) formed of hexagonal stock for receipt in a wrench.

10. To bend the pieces into shape and accurately line them up, Boilermakers use plumb bobs, levels, wedges, and turnbuckles.

11. So I also replaced the wire Bowsprit shrouds with rope, eyes spliced into both ends, and tightened by the existing turnbuckles.

12. Bucksaw definition: a woodcutting saw having its blade set in a frame and tensioned by a turnbuckle across Meaning, pronunciation, translations and examples

13. For sailboats that do not have an active Backstay that is “played” while sailing, a turnbuckle that can be adjusted without tools is the next best thing

14. Clevises Clevises have to be right hand and left hand threaded when paired with a single rod to allow for tensioning. When used with a turnbuckle, both Clevises will need to be ordered with right hand threads only

15. Nuts (50) fitted to the bolts (30) are assembled to the nut-receiving portions (20) after adjusting the lengths of the bolts (30) to be assembled to the nut-receiving portions (20), thereby preventing the turnbuckle from being loosened.

16. Whether a Clevis is a bent flat bar around a board secured with a pin, two parallel "tangs" or plates with a pin, or a shackle like design at the end of a threaded rod - a Clevis end on a turnbuckle - …